B-369 stainless steel paper towel dispenser and wast bin combination 7,6L

Bobrick B-369 recessed paper towel dispenser and waste receptacle

Provide framed rough wall opening 12-5/8" wide x 26-5/8" high (320 x 675mm). Minimum recessed depth required to finish face of wall is 4" (102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then secure unit with sheet-metal screws furnished by manufacturer.

- Recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin finish.
- Flange shall be drawn and beveled, one-piece, seamless construction.
- Door shall be secured to cabinet with a full-length stainless steel piano-hinge and equipped with a knob latch.
- Paper towel dispenser shall dispense 350 C-fold or 475 multifold paper towels without adjustment or use of adapters.
- Removable stainless steel waste receptacle shall be retained in cabinet by a retaining hook feature, have top edges hemmed for safe handling, and shall have a minimum capacity of 2-gal. (7.6-L)

Dimensions:
width: 356mm
height: 711mm
depth in wall: 100mm
head start: 5mm
disabled mounting height: 1310mm

wall opening:
width: 321mm
height: 676mm
depth in wall: 102mm
head start: n.z.
disabled mounting height: 1285mm

Data sheet