Bobrick recessed satin brushed paper towel dispencer and waste bin combination

Bobrick B-36903 recessed paper towel dispenser and waste receptacle stainless steel

Provide framed rough wall opening 11-1/2" wide x 29-1/2" high (290 x 750mm). Minimum recessed depth required from fi nish face of wall is 3-3/4" (95mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other fi ller to eliminate gap between fl ange and fi nish face of wall. Mount cabinet with shims between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" sheet-metal screws (not furnished).

- Recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction.
- Door shall be 18 gauge (1.2mm); have 9/16" (14mm) 90° return edges; be secured to cabinet with a concealed, full-length stainless steel piano-hinge; and equipped with a stainless steel cable door-swing limiter and friction catch.
- Door conceals fl ange from view.
- Paper towel dispenser shall be capable of dispensing 300 C-fold or 400 multifold paper towels without adjustment or use of adapters.
- Waste receptacle shall be furnished with a removable, leakproof, rigid molded plastic waste-container with a capacity of 1.6-gal. (6.1-L).

Dimensions:
width: 330mm
height: 791mm
depth in wall: 92mm
head start: 14mm
disabled mounting height: 1295mm

wall opening:
width: 292m
depth in  wall: 95mm
head start: n.z.
disabled mounting height: 1270mm

Data sheet