Bobrick TrimLine B-39003 waste bin 45,4 L and paper towel dispenser combination 45L

Bobrick recessed stainless steel paper towel dispenser and waste receptacle

Paper towel dispenser adjusts to accommodate C-fold, multifold, or singlefold paper towels by repositioning built-in adapter tabs in one of six slots. No additional towel trays or adapters required. Waste receptacle is serviced by opening door and removing waste container.

Provide framed rough wall opening 16'' wide x 54-3/4'' high (405 x 1390mm). Minimum depth required from finish face of wall is 7-7/8'' (200mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished).

- Recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin finish.
- Door shall be 18 gauge (1.2mm); have 9/16'' (14mm) 90° return edges; be secured to cabinet with a concealed, full-length, stainless steel piano-hinge; and equipped with two tumbler locks keyed like other Bobrick washroom accessories.
- Paper towel dispenser shall be equipped with a six-position adapter that is adjustable to dispense 600 C-fold, 800 multifold, or 1100 singlefold paper towels.
- Waste receptacle shall be furnished with a removable, leakproof, rigid molded plastic waste-container with a minimum capacity of 12-gal. (45.4-L).

Dimensions:
width: 437mm
height: 1422mm
depth in wall: 194mm
headstart: 14
disabled mounting height: 1535mm

Wall opening:
width: 406mm
height: 1391mm
depth in wall: 200mm
headstart: n.z.
disabled mounting height: 1510mm

Data sheet