ETHERMA AQUA WSP tank for hot water - connection to fitting or pressureless connection
Pressure-resistant water tank with 5/10 liter volume; for under-counter installation; inner container made of stainless steel, housing made of white plastic;
Prices incl. VAT plus shipping costs
Delivery time 4-6 business days
Österreich
- Article Number: TH000080
-
Manufacturer: ETHERMA
Pressure-resistant hot water tank 5 / 10 liters in white for under-counter installation
The Etherma Aqua WSP hot water storage tank consists of a stainless steel boiler and a white plastic housing. Depending on the variant, the boiler is either equipped with a volume of 5 (manufacturer article number: 41112) or 10 liters (41115). The stainless steel boiler guarantees safety and means that the anode does not need to be replaced regularly. A maximum working pressure of 6 bar is achieved and a nominal output of 2 kW is obtained. The hot water cylinder is mounted on the fitting via a safety group (not included in the scope of delivery). The pressure-resistant design means that several tapping points can be connected. The pressure-resistant hot water cylinder is thus integrated into a closed system under the washbasin. However, an unpressurized connection is also possible. Installation is therefore under-sink. A Gz 1/2” is suitable as a water connection and is equipped with protection class IP 24.
Pressure-resistant hot water tank 5/10 liters
- Hot water tank
- Maximum working pressure: 6 bar
- Boiler material: stainless steel
- No regular replacement of the anode necessary
- Housing material: plastic
- Rated power: 2 kW
- Connection voltage: 220 v 240 V
- Frequency: 50/60 Hz
- Low pressure version
- Heating time from 10 °C - 65: 11 minutes
Variants offer 5 or 10 liter selection
- ET-AQUA-WSP-5D: 5 liter variant (manufacturer article number: 41112); dimensions: 427 x 285 x 163 mm
- ET-AQUA-WSP-10D: 10 liter variant (41112); dimensions: 470 x 329 x 239 mm
Connection information
- Version: Under counter
- Connection to fitting: via safety group (not included in delivery)
- Pressureless connection also possible
- Cold water connection: external thread (nominal diameter of cold water connection 1/2 inch (15); external pipe diameter of cold water: 12.7 mm)
- Hot water connection: external thread (nominal diameter of cold water connection 1/2 inch (15); external pipe diameter of cold water: 12.7 mm)
- Circulation line connection: external thread (nominal diameter of cold water connection 1/2 inch (15); Pipe outer diameter cold water: 12.7 mm)
- Connection tap connection: external thread (nominal diameter cold water connection 1/2 inch (15); Pipe outer diameter cold water: 12.7 mm)
- Water connection: Gz 1/2"
- Connection to hot water pipe
- Protection class: IP24
- Energy efficiency in hot water preparation (Nwh): 100%
- Tap profile: XXS
- Energy efficiency class: A
Scope of delivery: 1 x hot water tank
Data sheet:
Installation and operating instructions:
Technical Data:
- 【Volume and variants】 The Etherma Aqua WSP hot water storage tank is available in two versions: with a volume of 5 liters (manufacturer article number: 41112) or 10 liters (manufacturer article number: 41115), so you can choose the right size to suit your needs.
- 【Materials】 The hot water cylinder consists of a stainless steel boiler, which offers a long service life and a high level of safety, and a white plastic housing. The stainless steel material means that the anode does not need to be replaced regularly.
- 【Power and pressure】 The hot water cylinder achieves a maximum working pressure of 6 bar and has a rated output of 2 kW. It is operated with a connected load of 220-240 V at a frequency of 50/60 Hz.
- 【Installation and connection】 The storage tank is installed under the table and connected to the fitting via a safety group (not included in the scope of delivery). Both a pressure-resistant and a pressureless connection are possible. The water connection is made via an external thread with a nominal diameter of 1/2 inch.
- 【Dimensions and protection class】 The 5-liter version measures 427 x 285 x 163 mm and the 10-liter version measures 470 x 329 x 239 mm. The hot water cylinder has protection class IP24 and offers an energy efficiency class of A, with an energy efficiency of 100% for hot water preparation.
