B-306 soap dispenser with flag window 1,3L capacity of satin brushed stainless steel

Bobrick TrimLine-Serie B-306 soap dispenser for surface mounting of stainless steel 1,3L

Recessed soap dispenser, including mounting box shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin finish. Valve shall be operable with one hand and with less than 5 pounds of force (22.2 N) to comply with accessible design (including ADAAG in U.S.A.). Door shall have molded plastic soap container with plastic cap attached to back, equipped with a soap refill-indicator window and tumbler lock keyed like other Bobrick washroom accessories, and shall have concealed stainless steel piano-hinge. Corrosion-resistant valve shall dispense commercially marketed all-purpose hand soaps. Soap vessel shall have a capacity of 45-fl oz (1.3-L).

Technische Daten:
- Provide framed rough wall opening 8-3/8" wide by 4-3/8" high (210 x 110mm).
- Minimum recessed depth required from finish face of wall is 3-7/8" (98mm).
- Allow clearance for construction features that may protrude into rough wall opening from opposite wall.
- Coordinate with mechanical engineer to avoid pipes, vents, and conduits.
- Mount cabinet with shims between framing and cabinet at all points indicated by an S, then secure unit with screws furnished by manufacturer.
- Note: Place unit as close to top of deck of lavatory as plumbing vent code will permit and with bottom of door high enough to clear fixture trim.

Dimension:
width: 120 mm
height: 205
mounting depth: 95 mm
Projection wall to push bottom: 75 mm
disabled mounting height: 1290 mm

Data sheet (English)