Wall mounted towel bar of stainless steel in 2 different length B-673x24 / x18

Bobrick B-673x24 / x18 concealed surface mounted towel bar i 2 different lengths

To remove concealed wall plates from back of flanges and mounting brackets, loosen locking setscrews. Mount each wall plate so prongs are at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting brackets onto prongs of wall plates, then secure into position by tightening locking setscrews at bottom of flanges. Note: Centerline-to-centerline of concealed wall plates must be within 1/16" (1.6mm) of the Y dimension given. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.

- Surface-mounted towel bar shall be type-304 stainless steel.
- Flanges and support arms shall be 22 gauge (0.8mm) and equipped with concealed, 16-gauge (1.6mm) mounting brackets that are secured to concealed, 16-gauge (1.6mm) wall plates with locking setscrews.
- Towel bar shall be 3/4" (19mm) square tubing