Bobrick satin brushed stainless steel toilet tissue dispenser for 3 roils

Surface mounted three roil toilet tissue dispenser B-27313 of satin stainless steel

Unit holds 3 standard-core toilet tissue rolls up to 4-1/2" (120mm) maximum diameter. Tissue rolls are loaded into the cabinet through the top. Extra roll shall be manually dropped in place when bottom roll is depleted.

Surface-mounted three roll toilet tissue dispenser shall be type-304 stainless steel all-welded construction (CrNi 18/10 1.4301); exposed surfaces shall have satin finish. Lid shall be secured to cabinet with a hinge and equipped with a tumbler lock keyed like other Bobrick washroom accessories. Unit shall dispense three standerd-core toilet tissue rolls up to 4-1/2" (125mm). Extra roll shall be manually dropped in place when bottom roll is depleted.

- Cabinet and Lid consist of satin brushed stainless steel CrNi 18/10 and is 0,8mm thick.
- Extra roll shall be manually dropped in place when bottom roll is depleted.
- Unit holds 3 standard-core toilet tissue rolls up to 4-1/2" (120mm) maximum diameter.
- Dimensions: width: 117 mm height: 378 mm depth: 127 mm
- Typical mounting height: 710 - 915 mm
- Disabled mounting height: 710 mm

Installation:
- Mount unit on partition with three #10" x 5/8" (M4.8x 16mm) sheet-metal screws (not furnished) at points indicated by an S.
- For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws.
- For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws or provide 3/16" (5mm) toggle bolts or expansion bolts.

Datasheet (English)