Elbo heating thermostat - Accessories Flat Heating Design Infrared System

Digital Thermostat Exposed

is a good and easy to use control particularly suitable for our Elbo-therm infrared heating design.

Scope of supply:

1x PT14 thermostat temperature setting, surface Digital

Infrared Flat Heaters
With current heat .... Because everyone thinks the same to the small 2000W fan, with which one at most hands can warm up a bit. That was yesterday, no two days ago.
The infrared technology is so advanced that you can copy the infrared radiation from the sun precisely with an electric heating element.
This radiation is so effective that you can use as a rule of thumb to calculate: It takes 50-90 watts per square meter of electricity to a pleasant warmth in our homes to achieve.
  Of course, the best way to save energy is the isolation.
With top modern isolation of their living spaces, the value is lower even at 40 watts / square meter.
  Of course, you can operate in a space even more heating elements. According to your individual requirements.

Advantages:

Economical & Ecological
Up to 50% less cost of acquisition and heating costs compared to other heating systems
Heating yield almost 100% and subject to change at this level
No Heat coating - therefore also suitable for high ceilings!
No oxygen consumption
Space-saving and maintenance free (as opposed to the burner, boiler, fireplace)
No additional costs through chimney sweep or storage of oil or pellets
Avoids season losses
Easy installation via plug
Very low installation costs
Long service life because no moving parts
Little energy expenditure by direct radiation
Combined with green electricity, the cleanest and most thinnest Heating
No emission
  Hygienic, no disturbing draft
No dust dispersion
No dry air

Device Properties:

The surface temperature of the heater is located at 85 degrees Celsius. There is no risk of serious burns, if the heating element is touched.
The heating element generates almost no electromagnetic pollution. The magnetic field is less than the field strength of a normal light bulb.
The panel radiators are decorative and are delivered with a restraint system.
The assembly is to be compared with the Hang an image.
You need an outlet only in the vicinity. Of course, a flush-mounted installation of the cable and the thermostat is also possible.
The back panels are coated in the same RAL color as the front, so its use as a standard model and auxiliary heater nothing more stands in the way.
Proper use as a full heating brings you a healthy indoor climate and energy savings

All products by Therm Elbo are manufactured in Germany under strict quality standards.
Preparation according to VDE
 

CE: The CE marking declares the manufacturer or EU importer in Accordance with regulation 765/2008, "that the product meets the applicable requirements set out in the Community harmonization legislation providing for its affixing.

RoHS: The EU Directive 2002/95 / EC on the Restriction of certain Hazardous Substances in electrical and electronic equipment regulates the use of hazardous substances in devices and components.
They, as well as the respective implementation in national law is, collectively referred to with the abbreviation RoHS.

IP44 The IP44 describes the protection of our products against;
✔ access with wire
✔ solid foreign objects with a diameter of 1mm at least
✔ splashing water